LG Minibeam Nano PV150G Owner's Manual page 108

• To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after power
down to allow for proper cool down
(not applicable on LED models).
• Do not touch the lens; doing so can
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use. Use
caution when handling unit, allowing
for proper cool down.
• Only use a grounded electrical outlet.
(Except for devices which are not
grounded.)
• Do not insert anything into or cover
up the exhaust vents.
- This may result in fire or electric
shock.
• Follow all maintenance guidelines
for optimal use; service only at an
authorized service center.
• Lamp contains mercury and as such
must be disposed of according to
local, state and federal laws (not
applicable to LED models).
• Keep it out of reach of children.
- Failure to do so may result in
personal injury and damage to
the product.
SAFETY PRECAUTIONS
CAUTION
•
Do not use or store the projector
outdoors for long periods of time.
• Be sure to unplug if the projector is
not to be used for a long period.
- Accumulated dust may result
in fire or electric shock due to
overheating, ignition, or poor
insulation.
• Only use the specified type of
battery.
- Burst or leaking batteries may
result in damage or injury.
• The battery contains lithium-ion, so it
must be handled with care.
- This may result in explosion or
fire.
• Dispose of used batteries properly.
- This may result in explosion
or fire. The correct method of
disposal may vary depending on
your country or region. Dispose of
the battery pack as instructed.
• Do not throw or disassemble the
bat tery.
- This may result in fire or
explosion due to damage to the
battery.
11