LG Minibeam Nano PV150G Owner's Manual page 107

10
SAFETY PRECAUTIONS
• When cleaning plastic parts, such
as the projector case, disconnect
the product from the power first and
wipe with a soft cloth. Do not spray
with water or wipe with a wet cloth.
Never use glass cleaner, automobile
or industrial polish, abrasives or
wax, benzene, alcohol, etc. when
cleaning plastic parts, such as the
projector case as they can damage
the product.
- This may also create a fire
hazard, result in electric shock or
product damage (deformation,
corrosion or breakage).
• Do not wipe the optical system (lens,
mirror) right after the product has
been turned off or while the product
is being operated. When cleaning
each part of the product, remove the
power cord and wipe gently with a
soft cloth. Do not spray with water
or wipe with a wet cloth. Do not use
detergents, automobile or industrial
polish, abrasive substances, wax,
benzene, alcohol, water, etc. on the
product's main unit or optical system
(lens, mirror) as this may damage the
product.
- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in
electric shock.
Others
WARNING
• When you go out, place the projector
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord
may result in short circuit or fire.
• Do not use the projector near high-
precision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of
the product, causing an accident.
• Only a qualified technician can
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
center.
- This may result in fire or electric
shock.
• Proper ventilation required, do not
block airflow around unit. Doing
so can cause injury and internal
overheating.