Using The Joystick Button; Basic Functions - LG Minibeam Nano PV150G Owner's Manual

Using the Joystick Button
You can operate the projector by pressing the button or moving the joystick left,
right, up, or down.
Basic functions
NOTE
• Place your finger over the joystick button and move it up, down, left, or right.
Be careful not to press the joystick button. If you press the button while moving
the joystick, the volume control may not work, and the cursor may not move.
When the projector is turned off, place your
Power On finger on the joystick button, press it once,
and release it.
When the projector is turned on, place your
finger on the joystick button, press it once for
a few seconds, and release it. (However, if
Power Off
the Menu button is on the screen, pressing
and holding the joystick button will let you
exit the Menu.)
Place your finger over the joystick button
Volume
and move it left or right. You can adjust the
Control
volume level.
If you move the joystick up, down, left, or
Up/Down/
right, you can move the cursor to select the
Left/Right
menu items.
21
PREPARATION