LG Minibeam Nano PV150G Owner's Manual page 103

6
SAFETY PRECAUTIONS
CAUTION
•
Always grab the plug to remove the
AC adapter or power cord.
- Otherwise, this may result in a
fire or may damage the product.
• Refrain from constantly bending the
power cord of the AC adapter.
- If the power cord is bent
excessively for a long period of
time, the cord may break inside.
This may result in a fire or electric
shock.
• Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric
shock.
• Keep the power cord away from
heating devices.
- The wire's sheath may melt,
which may result in fire or electric
shock.
• Place the projector where people will
not trip over or tread on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric
shock.
• Do not turn the projector on or off
by plugging in the power plug or
unplugging it from the wall outlet. (Do
not use the power plug as a switch.)
- This may result in electric shock
or damage to the product.
•
Do not insert a conductor into the
other side of the wall outlet while the
power plug is inserted into the wall
outlet. In addition, do not touch the
power plug immediately after it is
disconnected from the wall outlet.
- This may result in electric shock.
• Only use the official power cord pro-
vided by LG Electronics. Do not use
other power cords.
- This may result in fire or electric
shock.
• If any water or foreign materials have
gone into the AC adapter, power
cord, or the interior of the projector,
turn off the projector by pressing the
power button. Remove all the cables,
and then contact the customer
service center.
- This may result in fire or electric
shock.
• The surface of the AC adapter is
hot. Keep the AC adapter out of the
reach of children and avoid touching
it during use.