Advertisement
Quick Links
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP
POINTS, SHARP EDGES AS RECEIVED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Asherton File
Model # SPUS-ASHF
1-866-942-5362
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2018-05-29 Rev. 0001-A Factory: HECFUR
LOT NUMBER:
DATE PURCHASED: /
/
Advertisement
Related Manuals for Whalen Asherton File SPUS-ASHF
Summary of Contents for Whalen Asherton File SPUS-ASHF
- Page 1 LOT NUMBER: DATE PURCHASED: / Asherton File Model # SPUS-ASHF ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
-
Page 2: Special Note
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: File Asherton MODEL #: SPUS-ASHF MADE IN CHINA MAXIMUM LOAD 50 lb. - Page 3 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH.
- Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- File Top (Qty. 1) B- Left Side Panel (Qty. 1) C- Right Side Panel (Qty. 1) Back Panel (Qty.
- Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. (1) Small Cam Lock (2) Large Cam Lock (3) Cam Bolt (Qty. 8+1 extra) (Qty. 12+1 extra) (Qty.
- Page 6 Upper Drawer Assembling 1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw four Cam Bolts (3) into the designated small holes on the Utility Drawer Front (G). 3.
- Page 7 Upper Drawer Assembling 5. Fasten the Utility Drawer Back Panel (H) to the Drawer Side Panels (I and J) with four 32 mm Screws (6). Make sure that the Drawer Bottom Panel (K) fits securely into the groove of the Drawer Back Panel (H).
- Page 8 Drawer Assembling 8. Turn the assembled drawer upright. Attach one Knob (11) to the outside of the Drawer Front (G) with the Knob Bolt (12). 9. Pick up the Ball Bearing Slides (T) and separate the Slide Runners for the following step. Extend the Slide Runner all the way forward.
- Page 9 File Drawer Assembling 11. Securely screw four Cam Bolts (3) into the designated small holes on the File Drawer Front (L). 12. Attach the File Drawer Left and Right Side Panels (N and O) to the File Drawer Front (L) with four Small Cam Locks (1).
- Page 10 File Drawer Assembling 14. Fasten the File Drawer Back Panel (M) to the Drawer Side Panels (N and O) with four 32 mm Screws (6). Make sure that Drawer Bottom Panel (P) fits securely into the groove of the Drawer Back Panel (M).
- Page 11 Assembly Instructions 18. Securely screw the Cam Bolts (3) into the designated small holes on the Panels (A, B and C). 19. Using the pilot holes as a guide, attach separated Slide Track (T) to the Left Side Panel (B) with three 1/2”...
- Page 12 Assembly Instructions 21. Repeat the same procedure to combine Slides (T and CR) with the Right Side Panel (C). 22. Attach the Back Panel (D) to the Right Side Panel (C) with two M8 x 30 mm Wood Dowels (4) and two Large Cam Locks (2).
- Page 13 Assembly Instructions 23. Attach the Front Stretcher (E) to the Right Side Panel (C) with one M8 x 30 mm Wood Dowel (4) and one Large Cam Lock (2) as shown. 24. Repeat the same procedure to attach the Left Side Panel (B) at the opposite end.
- Page 14 Assembly Instructions 25. Attach the File Top (A) to the Panels (B, C and D) with five M8 x 30 mm Wood Dowels (4) and six Large Cam Locks (2). 26. Attach the Bottom Panel (F) to the Panels (B, C and D) with five M8 x 30 mm Wood Dowels (4) and six 50 mm Screws (7).
- Page 15 Assembly Instructions 27. Attach the Bases (Q) to the Bottom Panel (F) with four 15 mm Bolts (8) and four Washers (9 and 10). 28. Insert the assembled drawer into the frame. Extend the Ball Bearing Slide Tracks on the Panels all the way forward (including ball bearing cart).
- Page 16 Assembly Instructions DL / DR CL / CR 29. To insert the assembled Utility Drawer inside the unit, tip the front of drawer down and drop the rollers of the drawer slide runners behind the rollers of slide tracks on the unit. Lift the front of the drawer up and slide it into the unit.
-
Page 17: Quality Guarantee
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.