Napoleon BIPRO500-3 Manual page 17

BUILT-IN UNIT OPENING DIMENSIONS
MODEL
BIP / BIPRO500
SIDE BURNER
WARNING!
!
materials when installed with zero clearance liner Part No. BI-3323-ZCL, and must be installed and
serviced by a qualified installer to local codes.
WARNING!
(certified to ASTM E-136) such as steel studs, cement board, ceramic tile, marble, paint etc. When
adding finishing materials to the appliance. Do not use wood or drywall.
!
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
OPENING FOR WIRES
(2" (51mm)
34" (864mm)
RECOMMENDED
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
N415-0541 DEC 11.18
N415-0541 DEC 11.18.indd 17
OPENING DIMENSIONS
W D H
30 3/4" 20 5/8" 8 7/8"
781 mm 524 mm 225 mm
12 3/4" 16 1/2" 4 1/2"
324 mm 419 mm 114 mm
This grill is designed for installation in a built-in enclosure constructed of combustible
When not installing with the zero clearance liner, use only non-combustible materials
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
!
WARNING!
can not be stored below the gas
grill.
WARNING!
!
CABINET AND COUNTER TOP MUST BE
MADE FROM NON-COMBUSTIBLE MATERIAL WHEN
NOT INSTALLED WITH THE ZERO CLEARANCE LINER
PART NO. BI-3323-ZCL
NOTES
WITHOUT ZERO CLEARANCE LINER
OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
H
A propane tank
CABINET FRAME,
17
EN
www.napoleongrills.com
12/11/2018 1:44:27 PM