Table of Contents
Advertisement
WARNING TO ELECTRICIAN OR INSTALLER
♦ Please read this instruction manual completely.
♦ If you are unfamiliar with NEC compliant solar electric installation, then
consult with the dealer that supplied your tracker. They should have the
skill and expertise to supply you with the necessary wiring diagrams and the
appropriate connection wire, grounding equipment, junction boxes and fusing.
♦ Failure to ground the array structure, including each module frame, the
aluminum tracker frame, the drive head assembly and the pipe mast may
make the tracker susceptible to damage by lightning.
♦ Do not rely on the pipe mast to act as a ground rod. It is not a reliable
substitute for a properly installed ground rod.
♦ Please send in the Wattsun Tracker Warranty Card. Array Technologies
does not share any of the information provided on the warranty card.
♦ Please leave this manual for the tracker owner(s). It is their property and
will help resolve any potential problems.
♦ Please provide the following information for the owner:
Serial Numbers: __________________________________
Serial Number located on the controller
Tracker Type: Dual-Axis Tracker is Standard on AZ-225
Controller is powered from:
System Type: Off-Grid/Remote Home
Water Pumping
PV Array:
PV System Voltage is ______ VDC
Module Manufacturer: ____________
Mounting Pole Height above the Ground is: ________ FT
Battery Bank
Power Supply
Grid-Intertie - no battery backup
Other _____________________
______________________________________
Serial Number located on the drive assembly
Grid-Intertie - battery backup
Number of Modules: __________
Module Model: ____________
3
Hide quick links:
Advertisement
Table of Contents
