Table of Contents
Advertisement
26
en | Amplifier DSP
FX1 & FX2 Menu (Mixer mode)
The FX1 & FX2 menu is used to select the reverb, delay, chorus, or flanger preset for each FX
unit.
AUX OUT Menu (Mixer mode)
The AUX OUT menu is used to select the signal present at the AUX OUT connector:
–
–
MIX OUT Menu (Mixer mode)
The MIX OUT menu is used to select which signals should be output at MIX OUT and which
signal should be delivered by the loudspeaker.
–
–
–
BLUETOOTH Menu
Turning Bluetooth® ON or OFF
To turn Bluetooth® ON or OFF, do the following:
1.
The Bluetooth menu options are ON/OFF, CONTROL PAIR, and AUDIO PAIR.
CONTROL PAIR Menu
The CONTROL PAIR menu is used to enable the QuickSmart Mobile wireless control and
monitoring application. Available options for this selection are: ON or OFF.
The default is OFF.
Notice!
i
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks
and trade names are those of their respective owners.
AUDIO PAIR Menu
The AUDIO PAIR menu is used to stream audio from your Bluetooth® enabled device to the
loudspeaker system. Available options for this selection are: PAIRING, ON or OFF.
The default is OFF.
Pairing the portable column system with your Bluetooth® enabled device
To pair the portable column system with your Bluetooth® enabled device, do the following:
1.
2.
3.
2020-12 | v01 | F.01U.393.750
AUX MIX (default) - provides the signal mix controlled by the individual channel AUX
sends
MAIN MIX - provides the same signal that is present at the loudspeaker
L+R: INPUTS 1-4 and the left and right signals of INPUT 5/6 & 7/8 are summed. The sum is
output at MIX OUT and is delivered by the loudspeaker. (Default)
R: Only the right signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned
right is output at MIX OUT. The loudspeaker will deliver only the left signal.
L: Only the left signal of INPUT 5/6 & 7/8 and the percentage of INPUTS 1-4 panned left is
output at MIX OUT. The loudspeaker will deliver only the right signal.
Select ON.
OR
Select OFF.
From the DSP menu, scroll to AUDIO PAIR.
Select AUDIO PAIR.
AUDIO PAIR mode enables 120 seconds of visibility to Bluetooth® enabled devices.
On your mobile device, select EV EVOLVE to initiate the pairing process.
Once the device is paired, all device audio will be output through the EVOLVE system.
User manual
EVOLVE Portable Column Loudspeaker
Electro-Voice
Advertisement
Table of Contents
