Table of Contents
Advertisement
The control panel freezer
On /
Off
Cooler
˚C
F.
Mains indicator light (green)
G. Button On/Off for the appliance
H. Temperature setting button (for warmer
temperatures)
I.
Temperature display
J.
Temperature setting button (for colder
temperatures)
Temperature setting buttons
The temperature is adjusted using the "H" and "J"
buttons. These buttons are connected to the
temperature display.
The temperature display is switched over from the
display of the ACTUAL temperature (Temperature
display is illuminated) to the display of the DESIRED
temperature (Temperature display flashes) by
pressing one of the two buttons,"H" or "J".
Each time one of the two buttons is pressed again
the DESIRED temperature is adjusted by 1 °C.The
DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display
automatically switches back after a short period
(approx. 5 sec.) to the display of the ACTUAL
temperature.
DESIRED temperature means:
The temperature that has been selected for inside
the freezer. The DESIRED temperature is indicated
by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current
temperature inside the freezer.The ACTUAL
temperature is indicated with illuminated numbers.
14
On /
Off
˚C
Cooler/
Freezer
K. Quick freeze function "on" indicator (yellow)
L.
M. Alarm off reset light
N. Alarm off reset button
Temperature display
The temperature display can indicate several pieces
of information.
During normal operation, the temperature currently
present in the freezer (ACTUAL temperature) is
displayed.
When the temperature is being adjusted a flashing
display indicates the freezer temperature currently
set (DESIRED temperature).
Starting up - setting the temperature
Plug the mains plug into the mains socket.
Press ON/OFF button (G) for the functioning of the
whole appliance. The green mains pilot indicator
illuminates. The alarm light flashes until the
temperature is reached.The buzzer sounds.
Pressing button "N" stops the buzzer.
Press either the H" or "J" button. The temperature
display switches over and the DESIRED temperature
currently set flashes on the temperature display.
Set the required temperature by pressing the "H" or
"J" buttons (see section "Temperature setting
buttons"). The temperature display will immediately
show the changed setting. Each time the button is
pressed the temperature is adjusted by 1 °C.
From a food safety point of view -18 °C should be
considered sufficiently cold for storing food in the
freezer.
The alarm light goes off, when the set temperature
is reached.
˚C
˚C
Quick freeze button
Quick
freeze
Alarm off
Freezer
Advertisement
Table of Contents
