How To Boot The I.mx 6Sololite Evk Board; How To Enter Serial Download Mode For Mfgtool; How To Boot From Sd Card From Slot2; How To Boot From Emmc4.4 - Freescale Semiconductor i.MX 6SoloLite User Manual

Chapter 4

How to Boot the i.MX 6SoloLite EVK Board

The boot modes of the i.MX 6SoloLite EVK board are controlled by the boot
configuration DIP switches on the board. To locate the boot configuration switches, see .
The following sections list basic boot setup configurations only.

4.1 How to Enter Serial Download Mode for MFGTool

Switch
S1

4.2 How to Boot from SD Card from Slot2

The following table shows the dip settings for SD2 boot:
Switch D1
SW3 OFF
SW4 OFF
SW5 OFF
Table 4-3. The boot mode setup for SD2 boot (S1)
Switch
S1
i.MX 6SoloLite EVK Linux User's Guide, Rev. L3.0.35_4.1.0, 09/2013
Freescale Semiconductor, Inc.
Table 4-1. Boot switch setup for MFGTool
D1 (BOOT_MODE0)
ON
Table 4-2. Boot switch setup for SD2 boot
D2 D3 D4
ON OFF OFF
OFF ON OFF
OFF OFF OFF
D1
OFF
D2 (BOOT_MODE1)
OFF
D5 D6 D7
OFF OFF OFF
ON ON OFF
OFF OFF OFF
D2
ON
D8
OFF
OFF
OFF
15