Radio Shack ADV0801 Owner's Manual page 64

ADV0801 Owner's Manual Draft
Backlight
Alarm
Fav
Skywarn
EXPERT BELOW
Modulation
Atten
Delay
Delay Time
Digital AGC
Supertrack
On, Off or Flash
Controls whether the backlight should be on, off or
flashing while the object is active.
None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp, Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the CONV object. When an
Audible Alarm is selected, the selected alarm will play at
the beginning of each transmission on the CONV object,
or anytime the scanner stops for activity on the CONV
object while scanning.
On or Off
When On, the CONV object is a member of the Favorites
Scan List.
On or Off
When On, the CONV object is a member of the Skywarn
Scan List.
AM, FM, NFM, AU
Modulation setting for the CONV channel. In most cases
AU will work fine. Use AM to override and force AM
modulation, FM to force FM modulation, NFM to force
narrow FM modulation.
On or Off
When on, applies 20 dB of attenuation to all transmissions
on the CONV channel. Useful in areas where interference
from nearby strong signals is present.
On or Off
Controls whether a Delay is used to wait for reply traffic
after a transmission on the CONV channel.
1-200
Sets the amount of time (in 100 millisecond intervals) for
the wait for reply delay if Delay is On, e.g., 20=2 seconds.
On or Off
Controls Digital AGC function for the CONV channel
On or Off
Alternative DSP decoding algorithm. May help reception
on some systems.
Page 64