Radio Shack ADV0801 Owner's Manual page 32

ADV0801 Owner's Manual Draft
To find objects that are locked out, press the L/Out softkey. The scanner finds the first locked
out object. Press L/OUT to toggle lockout status. Press the EXIT softkey when finished. Press
the EDIT softkey to edit the object menu for the found object. Press the NEXT softkey to find
the next locked out object. When the scanner finds a matching object, you may press MAN to
begin monitoring of the found object in Manual mode. You may also press PGM to exit FIND
and execute programming tasks at the found object position. If you wish to edit the object, press
the EDIT softkey. If you wish to continue searching, press the NEXT softkey.
To find objects that contain a specified text string, press the Text softkey then enter the text
string you wish to search for. Press the OK softkey to begin searching. Press the Exit softkey to
cancel the FIND operation. Press the Qtxt softkey to use QuickText in your find text screen. For
more information on text entry and QuickText, please see the section of this manual entitled
"Standard Text Entry Method and QuickText". Once you have started searching, the radio will
stop on any object where your find text is found in the frequency, tag, or ID fields as described
above. When the scanner finds a matching object, you may press MAN to begin monitoring of
the found object in Manual mode. You may also press PGM to exit FIND and execute
programming tasks at the found object position. If you wish to edit the object, press the EDIT
softkey. If you wish to continue searching, press the NEXT softkey.
FIND keeps the last search text you specified stored so that you may use it again in subsequent
FIND operations.
Filtering By Object Type
When browsing objects in PGM mode, you can filter the objects that are displayed by their type.
Press the PGM key on the keypad, then press the EDIT softkey. Press the < or > keys on the
5-way pushbutton pad to scroll the Edit softkeys to display the filter softkeys. The filter softkeys
are as follows:
CONV
TGRP
TSYS
SRCH
STLK
To filter browse for a specific type of object, press the softkey that corresponds with that object
type. For example, press the CONV softkey, then use the < > ^ v keys on the 5-way pushbutton
pad to browse only conventional objects.
Object Lockout
The L/OUT key is used to lock out objects. When an object is locked out, traffic is not received on
that object until it is unlocked, even if the object is mapped to more than one Scan List. Locking
out an object locks it out "radio-wide" until it is enabled by toggling the lockout setting.
Four types of lockout functions are available in the ADV0801, temporary lockout, permanent
Page 32