Radio Shack ADV0801 Owner's Manual page 62

ADV0801 Owner's Manual Draft
SRCH Dig AGC
SRCH SuprTrk
TLO=FUNC L/O
DupeChecksSQ
TGID Format
TGRP Ignore
ShowCCInfo
CONV Menu Reference
The CONV menu is used when creating new Conventional Channel objects, or editing existing
Conventional Channel objects. All menus are shown in the scanner's display as a three line
window that can be scrolled up or down to access the various different parameters. The active
parameter is always the middle parameter and is indicated by a flashing ":". The entire CONV
menu is shown below:
CONV Parameter
Scan Lists
On or Off
Sets digital AGC mode on or off for all search types. Useful
to compensate for low or high digital audio levels caused
at the system.
On or Off
Alternative DSP decoding algorithm is applied to all
search types. May help reception on some systems.
On or Off
Controls the operation of the L/OUT key. When Off,
pressing L/OUT performs a Temporary Lockout of the
selected object. When On, pressing L/OUT performs a
Permanent Lockout of the selected object.
Yes or No
If set to Yes, dupe checking will check both the stored
frequency and any encoded squelch settings when
checking for duplicate CONV objects.
Norm, DEC or HEX
Selects TGID display format
Yes or No
If set to Yes, TGRP wildcards will ignore calls on
previously stored TGRPS that are mapped to disabled
Scan Lists.
Yes or No
For Motorola and P25 systems, shows current control
channel index (from TSYS frequency list) and frequency
alternating with the voice frequency.
Options Description
On or Off for Scan List 1-20
Sets membership in Scan Lists. Use < > keys to scroll
through Scan Lists. Use SEL key to toggle Scan List
Page 62