Radio Shack ADV0801 Owner's Manual page 53

ADV0801 Owner's Manual Draft
you wish to use, instead of scrolling and pressing SEL.
Customizing QuickText
To edit the QuickText words, press PGM, then the GLOB softkey. Scroll down to the QTXT
section using the v key on the 5-way pushbutton pad and find the QTXT storage location that
you wish to change. Press the >  k ey to edit the QTXT entry. Use the standard text entry method
to enter your desired text. When you use your QTXT entry in a text field, any unused spaces
will be filled with space characters. If you want to leave room for additional text after the QTXT
is loaded into a text field, include a space after your text, then a dollar sign ($). This will place
one space after your QTXT when you use your QTXT in a text field, and the edit cursor will be
positioned just after that space where you can continue appending text in the text field before
you save it. For example, if you use the entry SHERIFF in the QTXT storage location, your text
entry field will look like this after you load the QTXT "SHERIFF":
SHERIFF ░←note that cursor is positioned at end of text field
if you use the entry SHERIFF $ in the QTXT storage location, your text entry field will look like
this after you load the QTXT "SHERIFF":
SHERIFF ░←note that cursor is positioned at end of the word
Once you are finished editing your QTXT storage location, press the SAVE softkey to save the
QTXT, then press the SAVE softkey again to save the changes you made to the GLOB menu.
Power-On Configuration Key Sequences
Your ADV0801 features power-on keypress sequences that are used as shortcuts to
configuration items, like attenuator settings, backlight settings and memory information.
Power-on key sequences are also used to place your scanner into firmware upgrade mode for
CPU and DSP firmware upgrades.
The following table lists the power-on key sequences available in the ADV0801. Unless
otherwise specified, each sequence is invoked by pressing and releasing each key in sequence,
one at a time. The first key must be pressed while the Welcome/Owner screen is being
displayed:
Key Sequence
1
2
3
RIGHT
ATT
0, 0
0, 1
factory defaults. Does not affect V-Scanners.
0, 2
working memory or V-Scanners.
Function
Shortcut to PGM>GLOB>Sound Mode
Shortcut to PGM>GLOB>Key Beeps
Displays Boot, CPU and DSP versions
Shortcut to PGM>GLOB>Light Mode
Shortcut to PGM>GLOB>Atten Mode
Shortcut to PGM>GLOB>Memory Info
Destructive, clears working memory and resets all Global settings to
Destructive, resets all Global settings to factory defaults. Does not affect
Page 53