fantastic furniture Eden Utility 5 Drawer 2 Shelf Manual page 9

Step 9
You will need
1 x Dowel 5 x Small Cam
(H1) Nuts (H15)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 1 x Dowel (H1) into Drawer Front (P8). Insert 5 x Small Cam Nuts (H15) into Left & Right
Drawer Sides (P9 & P10) and Support Rail (P13). Rotate the nuts so the arrows point towards
the incoming bolts. Attach the Left & Right Drawer Sides (P9 & P10) and Support Rail (P13) to
Drawer Front (P8) by tightening all nuts with the Phillips Head Screwdriver.
Step 10
Slide Drawer Base (P11) into the grooves of Left &
Right Drawer Sides (P9 & P10) and Drawer Front (P8).
fantasticfurniture.com.au
(P9)
(P8)
(P13)
(P9)
(P8)
(P11)
(P10)
Ensure laminated
side of panel is
facing inwards.
(P10)
Page 9