fantastic furniture Eden Utility 5 Drawer 2 Shelf Manual page 6

Ensure the grooves in the Top/Base
Panels (P1 x 2) and Fixed Shelf Panel (P6)
Step 3
are located at the back of the unit.
You will need
8 x Dowels
8 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into
Left Side Panel (P2). Insert 8 x
Cam Nuts (H4) into Top/Base Panels (P1 x 2),
Fixed Shelf Panel (P6) and Rails (P5 x 2). Rotate
the nuts so the arrows point towards the
incoming bolts. Attach Top/Base Panels (P1 x 2),
Fixed Shelf Panel (P6) and Rails (P5 x 2) to Left Side Panel (P2)
by tightening all nuts with the Phillips Head Screwdriver.
Step 4
Slide Back Panels (P7 x 2 & P14 x 2) into the grooves of
Top/Base Panels (P1 x 2) and Fixed Shelf Panel (P6).
fantasticfurniture.com.au
(P1)
(P7)
(P7)
(P1)
This is how a cam nut works........
Grooves for
back panels
(P6)
(P2)
Ensure laminated
side of panels are
facing inwards.
(P14)
(P6)
(P14)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P5)
(P1)
(P5)
(P1)
Page 6