Table of Contents
Advertisement
Use of wired remote controller
Use of user setting mode
Sub-menu
Main menu
1. If you want to use the various user setting modes for your wired remote controller, press the User Set button.
2. Refer to the list of user setting mode for your wired remote controller on the next page, and select the desired
menu.
f Using the [∧]/[∨] buttons, select a main menu number and press the [＞] button to enter the sub-menu setting
screen.
f Using the [∧]/[∨] buttons, select a sub-menu number and press the [＞] button to enter data setting screen.
f When you enter the setting stage, the current setting value will be displayed.
f Refer to the chart for data settings.
f Using the [∧]/[∨] buttons, change the setting value. Press the [＞] button to move to the next setting value.
f Press the Set button to save the setting value and exit to the sub-menu setting screen.
f Press the ESC button to exit to normal mode.
• When setting the data, you can move SEG range with the [＜]/[＞] buttons.
• While configuring the setting, press the ESC button to exit to the sub-menu setting screen without saving your
NOTE
changes.
• When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
18
DVM Hydro Unit_MWR-WW00_IM_EN_03647A(1).indd 18
SEG Used
1 2 3 4
2013-01-09 오후 2:48:43
Advertisement
Table of Contents
