Important Safety Instructions - Sharp IG-NX2E Operation Manual

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions carefully before using this product.
When using electrical appliances, basic safety precautions should
be followed, including the following:
WARNING
• Do not operate switches while driving. (Doing so could lead to
accidents.)
• Do not install the product in places where it could hamper visibility
to the front, driving operations, or in places where it could be
dangerous to passengers. (Doing so could lead to accidents or
injury.)
• Do not put in places exposed to direct sunlight. (Doing so could
cause warping or malfunction.)
• This product is designed exclusively for use in vehicles with 12 V
batteries. Do not use it in other vehicles. Do not use the product in
large trucks, buses or other vehicles with 24 V batteries. (Doing so
could lead to fire or electric shock.)
• Do not damage or modify the cord. Also, do not use the cord if it is
damaged. (The damaged section could cause short-circuiting and
the cord could melt, leading to fire.) If the cord is damaged, contact
your store of purchase or wSHARP authorized service center.
• Do not pull on the cord when unplugging the Car Adapter or the
Micro USB Plug. (Doing so could damage the cord, leading to fire
or electric shock.)
• Do not plug in or unplug the Car Adapter or the Micro USB Plug
with wet hands. (Doing so could cause electric shock.)
• When transporting, be careful not to drop the product or subject it
to shocks. (Doing so could cause injury or damage.)
If the product should drop or be damaged, contact your store of
purchase or SHARP authorized service center.
Continued usage of damaged product could lead to fire or electric
shock.
• Do not modify the product. Also, no one other than an authorized
repairman should take apart or repair the product. (Doing so could
OM_IG-NX2_EN_MS_VT_CS.indb EN-1 OM_IG-NX2_EN_MS_VT_CS.indb EN-1
- To reduce the risk of electric shock, fire or injury :
EN-1
31/5/2564 BE 16:50 31/5/2564 BE 16:50