Checking The Current Input Signal - Daewoo DPP-42A2(GDBD) User Manual

- Press the [RECALL] button on the remote control, then displays basic informations of the current input signal,
Under this state, pressing the [RECALL] button once more, additional informations about the current input signal
will be displayed on the OSD.
1
Press the RECALL Button.
• Press the [RECALL] button on the Remote Control.
1. If you watch Component, PC, or HDMI:
Component
PM 12:00
H:1920
V:1080
2. If you watch TV:
PR 22 PR Name
Mono PM 12:00
Video PAL B/G
Audio I
Country GB
Channel C35
3. If you watch VCR image:
AV1
PM 12:00
Video PAL B/G
NOTES:
1) "1920 x 1080" displayed in the INPUT signal is not the
resolution of the set, but the signal that is sent by the Digital
Broadcasting Receiver.

Checking the Current Input Signal

Component
PM 12:00
H:1920
V:1080
Displays which input terminal is used, and indicates the input signal mode.
Indicates the mode and current time.
Indicates the horizontal and vertical resolution of the current input signal
Displays the program number and its name.
Indicates the current sound state and time.
Displays additional informations of TV signal of TV signal, video and
audio system. country, channel.
Displays the program number and input terminal, which is used.
Indicates the mode and current time.
Displays the video system of input signal
Checking the
Current Input Signal
• Used to check the
INPUT signal mode,
current time,
resolution, channel,
etc.
59 59