Page 1
Instructions for the Use and C are and Installation of ORS6WXA Slide-out Rangehood...
Page 2
You are welcoming an Omega appliance into your place and you can be sure it'll always serve you well. For important information about your Omega such as warranty registration, online manuals, specifications and catalogues, please visit...
It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, OMEGA serves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. In certain circumstances electrical appliances may be a safety hazard. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
DO NOT OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION BOOKLET APPLIANCE DETAILS Voltage: 220-240V Frequency: 50Hz Lamp Max: 2x28W E14 Halogen Rated Input Power: 256W GENERAL INFORMATION Before installing and operating the range hood, carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations.
Before using the appliance, remove the plastic coatings protecting the stainless steel finish. The OMEGA ORS6WXA range hoods are intended to be fitted into kitchen cabinetry. They can also be installed directly onto a wall if required. INSTALLATION OF THE OMEGA ORS6WXA RANGE HOOD DIRECTLY TO A WALL Ensure that the wall is structurally sound, and is capable of carrying the weight of the range hood.
INSTALLATION OF THE OMEGA ORS6WXA RANGE HOOD TO A CABINET The diagram below shows the distance required between the holes in the top of the range hood. Due to manufacturing procedures, it is recommended that the dimension be checked on the range hood before installing.
REPLACING THE BULBS 1. Switch the range hood off and disconnect from the mains power. 2. Open the aluminium filter. 3. Unscrew the light bulb carefully and replace it with a similarly rated halogen light bulb (230V E14 base 28W MAX). 4.
Need help?
Do you have a question about the ORS6WXA and is the answer not in the manual?
Questions and answers