Fn Key; Axisreset - RD RDC5121 Manual

 Copy to memory: copy the target Udisk file to the memory;
 Delete: delete the selected Udisk file;
FAT16, but it can identify them when the files are put under the root
directory of Udisk. The file name of more than 8 characters will
Prompt
automatically be cut out by the system. The file name that has only
English letters and digits will not show when they are copied to the
mainboard. The files copied from the mainboard to Udisk will be placed
under the root directory of Udisk.

4.3 FN key

Press the "FN" key in the main interface to enter the function menu, as shown below:
Press the "Y+/-" key to move the light blue cursor to the corresponding item and press the "ENTER
key to enter the corresponding submenu.

4.3.1 AxisReset+

When the green block is on this item, push the "Enter" key to show as below:
SHENZHEN RUIDA TECHNOLOGY
Figure 4.8
This system supports such file formats of Udisk as FAT32 and
RDC5121 Control System Manual
Figure 4.9
17