Introduction To The Main Interface; The Main Interface - RD RDC5121 Manual







finished. On pressing this key, it will show some entries in the interface, each entry
includes some functions, Z axes move. each axes to go home etc.;



4.2 Introduction to the Main Interface

4.2.1 The main interface

When the system is powered on, the screen will show as below:
 File: To display the running file's file number
SHENZHEN RUIDA TECHNOLOGY
:Set the relative origin;
:To track by the current file's frame;
:Let the Laser to splash;
:To stop work, or to exit to some menu;
:Validate the change;
:The Z/U key can be pressed when the system is idle or the work is
:To move the X axes or the left/right cursor ;
:To move the Y axes or the up/down cursor ;
Figure 4.1
RDC5121 Control System Manual
13