Turning Your Handset Off; Access Codes - LG KF300 User Manual

Getting started

Turning your handset off

Press and hold the end key until the
power goes off. There may be a few
seconds delay while the handset
powers down. Do not turn the
handset on again during this time.

Access Codes

You can use the access codes
described in this section to avoid
unauthorized use of your phone. The
access codes (except PUK and PUK2
codes) can be changed by using
Change codes feature of Settings
menu.
PIN code (4 to 8 digits)
The PIN (Personal Identification
Number) code protects your SIM card
against unauthorized use. The PIN
code is usually supplied with the SIM
card. When the PIN code request is
set to On, your phone will request
the PIN code every time the phone is
switched on.
24
When the PIN code request is set
to Off, your phone connects to the
network directly without the PIN
code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some
SIM cards, is required to access
functions such as information on
Call costs and Fixed dial number.
These functions are only available
if supported by your SIM card.
Check with your network for further
information.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code
is required to change a blocked PIN
code. The PUK code may be supplied
with the SIM card. If not, contact your
network operator for the code. If
you lose the code, also contact your
network operator.