Table of Contents
Advertisement
General Functions
Turning your handset on
Ensure that your USIM card is in your handset and the battery is charged.
Press and hold the
Enter the USIM PIN code that was supplied with your USIM card if PIN code setting
is on.
After a few seconds you will be registered on the network.
Turning your handset off
Press and hold the
There may be some delay while the handset powers down.
Do not re-power the handset during this time.
Access Codes
You can use the access codes described in this section to avoid unauthorized use of
your phone. The access codes (except PUK and PUK2 codes) can be changed by using
the Change codes feature [Menu 8.5.2].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your USIM card against
unauthorized use. The PIN code is usually supplied with the USIM card. When the
PIN Code Request is set to Enable, your phone will request the PIN code every time it
is switched on. When the PIN Code Request is set to Disable, your phone connects to
the network directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM cards, is required to access functions such
as Fixed Dial Number. These functions are only available if supported by your USIM
card.
24
key until power is on.
key until power is off.
Advertisement
Table of Contents
