Alpine X409 Owner's Manual page 121

Installation Instructions (Continued)
16
At radio cavity, connect the main harness, white
FM adapter, and green SiriusXM antenna, and
other adapters to factory harness and secure them.
19
Connect the camera interface module to the violet
or red factory camera plug and put it in right side
of radio cavity. Dip switch 1 will need to be moved
down for the Gladiator JT.
21
Run chime speaker harness from Maestro module
to behind the glove box and attach there.
X409-WRA-JL 20200825v1
18
If the vehicle has an OEM amplifier the KCX-
F200INT will need to be purchased separately.
This has 30" of cable so it can be routed behind
the glovebox. It is important to do this so it can
disappate heat properly. The audio settings will
also need to be set to flat as shown on page 28.
20
Attach the Maestro to the main harness and tuck it
in left side of radio cavity.
22
Remove the OEM USB from the Center Media
panel by unclipping the clips on the sides.
Jeep Wrangler
˜ 15/29