Setting A New Starting Point - Alpine X409 Owner's Manual

3.4.1 Setting a new starting point

For normal navigation, all routes are calculated from the current position. You can pause navigation to
check future routes, simulate them or see their length in time and distance. Then you can set the
starting point of the route to a location other than the current GPS position.
1. Press the navigation hardkey button to access the Navigation menu.
2. In the Navigation menu, tap
3. The first line from the bottom is the start of the route, normally the current GPS position. Tap
message.
4. The Change Start to... screen appears. Select the starting point of the route the same way you
select a destination.
5. The Multipoint Route screen appears where you can continue adding a destination to your
route.
.
, select , and confirm your action at the warning
47