Page 1
INSTALLATION GUIDE MV-4300PS Redundant Power Supply for MV-4300 Series Edition...
Page 2
Upon Receipt MV-4300PS units and their accessories are fully inspected and adjusted prior to shipment. Check your received items against the packing lists below. Check to ensure no damage has occurred during shipment. If damage has occurred, or items are missing, inform your supplier immediately. ...
Page 3
1. MV-4300PS (Option) Installation IMPORTANT To avoid electric shock, make sure that the grounding terminal is grounded before operation and/or pull out the AC cable from the outlet. A redundant power supply unit can be installed while the power is on, although the main unit’s power should normally be turned off when doing so.
Page 4
2. Replacing a Power Supply Unit How to replace standard Power Supply Unit 1 of an MV-4300 Series unit to a new one is explained below. When a Power Supply Unit 2 (MV-4300PS) is installed, perform replacement while the main unit’s power is on.
Page 5
Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Page 6
Tel: +1 352-371-1505 Fax: +1 714-894-5399 FOR-A Latin America and the Caribbean Miami Office Tel: +1 657-600-5759 FOR-A Latin America and the Caribbean Sao Paulo Office Tel: +55 (0)11-99913-3751 FOR-A Europe S.r.l. Via Volturno, 37, 20861 Brugherio MB, Italy Tel: +39 039-916-4811...
Need help?
Do you have a question about the MV-4300PS Series and is the answer not in the manual?
Questions and answers