Related Manuals for E-matic PMFMC
Summary of Contents for E-matic PMFMC
- Page 1 PMFMC Flush Microwave Sensor Instruction Manual Please read the instruction manual before installing and retain for the user/maintenance engineer for future reference. EMatic_PMFMC_Instructions_Rev01...
- Page 2 The PMFMC is a High Frequency (5.8GHz) 360˚ occupancy detector. High frequency signals are able to penetrate non-metallic materials such as wood, brick wall, glass, etc., but can not penetrate water or metal. High frequency sensors are less affected by temperature, airflow, wind, but humidity and vibration can often affect the performance of high frequency sensor.
- Page 3 Testing Turn the LUX adjuster fully clockwise (SUN); turn the TIME adjuster fully anti-clockwise to the minimum (10s). • Switch on the AC supply and after a 30sec warm-up period the sensor will now be in test mode • Walk test the sensor, when the sensor receives a valid trigger signal within its detection area the lamp will turn on.
- Page 4 Due to our policy of continuous improvement we reserve the right to change specification without prior notice. Errors and omissions excepted. These instructions have been carefully checked prior to publication. However, no responsibility can be accepted by Challenger for any misinterpretation of these instructions. E-Matic Energy Management Solutions Distributed by: Challenger Security Products 10 Sandersons Way, Blackpool, FY4 4NB Email: enquiries@e-matic.co.uk...