E-matic PM460LED Manual

CEILING LIGHT WITH MICROWAVE
SENSOR
MODEL: PM460LED
We are delighted that you have purchased this
MICROWAVE Light. This light is suitable for indoor
use only. Please read this instruction manual before
installation and retain for future reference.
IMPORTANT: Never modify the unit, there are no
user serviceable parts inside. Not suitable for use
with dimmer switches. Install in accordance with IEC
Wiring Regulations.
THE LIGHT SHOULD BE INSTALLED BY A
QUALIFIED ELECTRICIAN.

POSITIONING THE LIGHT

When selecting the mounting position, take into
account the following points:
1. The sensor is designed for optimum performance
when mounted at a height of above 2.5 to 4 meters
(see Figure )
2. Avoid pointing at or positioning close to heat sources
such as heaters or heat extraction units, which may
cause false triggering.
3x 3x
4x30mm 6x27mm
3
φ6mm
? 214
30mm
6
7
1
mm
OFF
4
8
3-4m
360
°
Max.6m Max.6m
0
2
5
9
ON
360
°