Download Print this page
Worx MAKERX WA7160 Safety And Operating Manual

Worx MAKERX WA7160 Safety And Operating Manual

Hide thumbs Also See for MAKERX WA7160:

Advertisement

Quick Links

SAFETY AND OPERATING MANUAL
WA7160 WA7161
20V Hub/HubX

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAKERX WA7160 and is the answer not in the manual?

Questions and answers

Summary of Contents for Worx MAKERX WA7160

  • Page 1 SAFETY AND OPERATING MANUAL WA7160 WA7161 20V Hub/HubX...
  • Page 3 PRODUCT SAFETY GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 4 After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
  • Page 5 Observe the plus (+) and minus (–) marks on the battery and ensure correct use. SYMBOLS Read the operator’s manual. Caution For indoor use only Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
  • Page 7: Component List

    COMPONENT LIST ON/OFF SWITCH USB PORT * SPEED CONTROL BUTTON BELT CLIP * FLEXIBLE POWER CORD POWER CONNECTOR * Not all the accessories illustrated or described are included in standard delivery. TECHNICAL DATA WA7160 WA7161 Output: 20 V 10 A, Max. Output 20 V 10 A, Max.
  • Page 9: Operation

    OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. ASSEMBLY 1. Insert battery pack into the hub. (See Fig. A) 2. Connect the hub and MakerX series tools. (See Fig. B) WARNING: Before operation, make sure the speed control button on the hub is at the“Min“...
  • Page 12 Copyright © 2021, Positec. All Rights Reserved. AR01563101...

This manual is also suitable for:

Maker x wa7161