Advertisement
Available languages
Available languages
ENGLISH
Be aware of where the branch will fall.
Cut downward and away from your body.
u
Make the cut close to the main branch or tree
u
body.
Vertical cutting
The tool allows close cutting to corners and other
difficult areas.
Insert the shank of the saw blade into the blade
u
holder with the teeth of the blade facing
upward.
Hold the tool with the shoe (3) facing downward
u
so that you are as close to the work surface as
possible.
Cut forward and away from your body.
u
Accessories
The performance of your tool depends on the ac-
cessory used.Stanley accessories are engineered
to high quality standards and designed to enhance
the performance of your tool. By using these ac-
cessories you will get the very best from your tool.
Blades
The saw will accept a blade up to 30 cm long.
Always use the shortest blade suitable for your
project but long enough to keep the blade cutting
through the material. Longer blades are more likely
to be bent or damaged during use. During opera-
tion some longer blades may vibrate or shake if the
saw is not kept in contact with the workpiece.
Maintenance
Your Stanley corded/cordless appliance/tool has
been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the
u
appliance/tool if the appliance/tool has a
separate battery pack.
Or run the battery down completely if it is
u
integral and then switch off.
Unplug the charger before cleaning it. Your
u
charger does not require any maintenance
8
apart from regular cleaning.
Regularly clean the ventilation slots in your
u
appliance/tool/charger using a soft brush or dry
cloth.
Regularly clean the motor housing using a
u
damp cloth. Do not use any abrasive or solvent
based cleaner.
Regularly open the chuck and tap it to remove
u
any dust from the interior (when fitted).
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you find one day that your Stanley product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Reuse of recycled mate-
rials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Batteries
Z
Stanley batteries can be recharged many
times. At the end of their useful life,
discard batteries with due care for our
environment.
Service Information
Stanley offers a full network of company owned
and authorized service locations throughout Asia.
All Stanley Service Centers are staffed with trained
personnel to provide customers with efficient
and reliable power tool service.Whether you
need technical advice, repair, or genuine factory
replacement parts, contact the Stanley location
nearest to you.
Advertisement
