Configuring The Sc836 X9 Universal Air Shroud - Supermicro SC836 X9 User Manual

3-4

Configuring the SC836 X9 Universal Air Shroud

The SC836 X9 universal air shroud can be customized into multiple configurations for
Supermicro systems. With all parts attached, with three positions each for component
parts B and E, and component part C and D, many possible combinations can be
configured for the SC836 X9 universal air shroud. With parts detached more
configurations are possible.
Some recommended example configurations for specific Supermicro motherboards are
shown below in
13.68" x 13" or 12" x 13" Intel Xeon or AMD Opteron motherboards.
Table 3-2. Examples of SC836 X9 Universal Air Shroud Configurations
Motherboard
H8DG6
X8DT6-F
X8DTN+-F
X9DA6
X9DR6-F
X9DR6-LN4F+
NOTE: The default configuration is with parts A, B, C, D and E already
connected
Table 3-2. Parts not listed in the table have been removed. All are
Slot and Tab Positions
Tab Position 1 (Part B), Tab Position B (Part E), Part D and Partition Part C
attached
Tab Position 0 (Part B), Tab Position A (Part E), Part D and Partition Part C
attached
Tab Position 0 (Part B), Tab Position A (Part E), Part D attached
Tab Position 2 (Part B), Tab Position C (Part E), Partition Part C attached
Tab Position 2 (Part B), Tab Position B (Part E), Partition Part C attached
Tab Position 2 (Part B), Tab Position C(Part E)
(Figure 3-7).
Chapter 3: Configuration and Installation
3-7