Table of Contents
Advertisement
Configuration and Installation
3-1
Overview
This chapter covers the configuration and installation of the SC836 X9 universal air
shroud into a server or into a chassis. The main section (component part A) is
connected to other sections (component parts B, C, D and E) to make up many possible
configurations based upon the sliding positions of the components and locking tabs
(even more if parts are detached).
3-2
SC836 X9 Universal Air Shroud Components
Figure 3-1. SC836 X9 Universal Air Shroud Components
Table 3-1. SC836 X9 Universal Air Shroud Components
Item
Description
A
SC836 X9 universal air shroud component, main body (part A)
B
SC836 X9 universal air shroud component, moving part (part B)
C
X8 air shroud universal component, partition (part C)
D
X8 universal air shroud component, tear-drop 55mm (part D)
E
SC836 X9 universal air shroud component, moving part (part E)
The SC836 X9 universal air shroud comes with the main body and four detachable
components
(Figure 3-1
components. These components can be used to create multiple different configurations
for use in sytems. See
The SC836 X9 universal air shroud is optimized for use with Supermicro X8DTx/X9DRx/
H8DGx series mainboards.
Chapter 3
E
B
A
and
Table
Section 3-4
3-1). See below for details on these various
for further details on configurations.
3-1
D
C
Advertisement
Table of Contents
