Download Print this page

Advertisement

Quick Links

H3C WA5510E-T Access Point Installation Quick Start-6W101
H3C WA5510E-T 无线接入点 快速安装指南-6W101
Tool list 工具参考
No installation tools are provided with the AP. Prepare tools yourself as required.
AP不随机提供安装工具,请用户根据实际安装需求自己准备安装工具。
Phillips screwdriver
Wire crimper
十字螺丝刀
压线钳
Marker
ESD wrist strap
记号笔
防静电腕带
Installation accessories安装附件介绍
Wall-mount brackets
Console cable
(user supplied)
Console 线缆
壁挂安装件(用户自备)
This guide provides two installation methods as examples. Determine the installation method and
prepare the accessories as needed.
Install the AP more than 5 m (16.40 ft) away from 3G/4G base stations and antennas.
本手册仅以下面两种安装方式为例,请根据实际应用场景,准备安装工具及附件,并选择合理安装方
式安装。AP的安装位置与3G/4G基站、天线的距离建议在5米以上。
Needle-nose pliers
Wire stripper
尖嘴钳
剥线钳
Heat gun
热风枪
Grounding cable
M3 screw
(user supplied)
(user supplied)
地线(用户自备)
M3螺钉(用户自备)
Dimensions 尺寸详情
18.50 mm
(0.73 in)
Side view
侧视图
Method one 安装方式一
Use M3 screws to secure the AP on a tray.
使用M3螺钉将AP固定到托盘。
76.00 mm
(2.99 in)
Bottom view
仰视图

Advertisement

loading

Summary of Contents for H3C WA5510E-T

  • Page 1 H3C WA5510E-T Access Point Installation Quick Start-6W101 H3C WA5510E-T 无线接入点 快速安装指南-6W101 Tool list 工具参考 Dimensions 尺寸详情 No installation tools are provided with the AP. Prepare tools yourself as required. 18.50 mm 76.00 mm AP不随机提供安装工具,请用户根据实际安装需求自己准备安装工具。 (0.73 in) (2.99 in) Phillips screwdriver...
  • Page 2 Method two 安装方式二 Connecting an M12 cable 连接M12线缆 Use M3 screws to attach the wall-mount brackets to the AP, and then use screws to mount the brackets on No M12 cable is provided with the device. Prepare an M12 cable with a standard 8-pin A-coding the wall.使用M3螺钉将壁挂安装件固定到AP,并使用壁挂件自带的螺钉将壁挂件固定到墙面。...
  • Page 3 Remove the dust plug and then connect the QMA connector of the RF cable to the connector on the device. 取下防尘塞,将QMA接头射频线缆接到设备上。 Copyright © 2018, New H3C Technologies Co., Ltd. The information in this document is subject to change without notice.