Subscribe to Our Youtube Channel
Related Manuals for H3C WA5620
Summary of Contents for H3C WA5620
- Page 1 H3C WA5620 Access Point Installation Guide New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W100-20200707...
- Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Command Conventions
Preface This installation guide describes the installation procedure for the H3C WA5620 Access Point. This preface includes the following topics about the documentation: • Audience. • Conventions. • Documentation feedback. Audience This documentation is intended for: • Network planners. •... - Page 4 Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information.
-
Page 5: Documentation Feedback
Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments. -
Page 6: Table Of Contents
Contents 1 Preparing for installation ·········································································· 1-1 Safety recommendations ································································································································ 1-1 Site preparation ··············································································································································· 1-1 Installation accessories ··································································································································· 1-2 Installation tools ·············································································································································· 1-2 2 Installing the AP ······················································································· 2-1 Installation flowchart········································································································································ 2-1 Pre-installation tasks ······································································································································· 2-1 Determining the installation position ··············································································································· 2-1 Mounting the AP··············································································································································... -
Page 7: Preparing For Installation
Preparing for installation Safety recommendations WARNING! Only professional technical personnel can install and remove the AP and its accessories. You must read all safety instructions carefully before working with the AP. To avoid possible bodily injury and equipment damage, read the following safety recommendations before installing the AP. -
Page 8: Installation Accessories
Installation accessories Table1-2 Installation accessories × 2 AP bracket Wall (ceiling) bracket Wall anchor kit × 1 × 2 Pan-head screw M4 × 10 bolt Installation tools When installing the AP, you might need the following tools. Prepare the installation tools yourself as required. -
Page 9: Installing The Ap
Installing the AP Installation flowchart Figure2-1 Installation flowchart Start Pre-installation tasks Wall mount Ceiling mount Determine the Mount the wall bracket to Mount the ceiling installation location the wall bracket to the ceiling Mount the AP Connect the power cord Connect the AP to the network Pre-installation tasks... -
Page 10: Mounting The Ap
Mounting the AP The AP can be installed only indoors. You can mount the AP on a wall or on a ceiling. Mounting brackets The AP comes with an AP bracket and a wall (ceiling) bracket. To mount the AP on a wall or a ceiling, attach the AP bracket to the AP, and attach the wall (ceiling) bracket to the wall or ceiling. - Page 11 Figure2-4 Attaching the AP bracket to the AP Mark the installation holes on the wall by using the wall bracket. Figure2-5 Marking the installation holes on the wall 82 mm (3.23 in) Drill two holes with a diameter of 5 mm (0.20 in) and a depth of 30 mm (1.18 in) in the marked locations.
- Page 12 Figure2-7 Hammering wall anchors into holes Align the installation holes in the wall bracket with the holes in the wall, and use screws to attach the wall bracket to the wall. Figure2-8 Attaching the wall bracket to the wall Align the AP with the wall bracket in the direction as shown Figure2-9, and rotate the AP clockwise until it clicks into place.
-
Page 13: Mounting The Ap On A Ceiling
Mounting the AP on a ceiling CAUTION: The ceiling for installing the AP must be less than 18 mm (0.71 in) in thickness, and can bear a load of 5 kg (11.02 lb). If the ceiling is not strong enough, use boards to reinforce the ceiling as a best practice. -
Page 14: Powering On The Ap
Figure2-12 Attaching the AP to the ceiling bracket Powering on the AP You can supply power to the AP by using a power adapter or through 802.3at-compliant PoE. Powering on the AP through PoE sets the MIMO mode to 1×1 and disables the USB port and disconnected Ethernet port. -
Page 15: Verifying The Connection
Table2-1 describes the power adapter specifications. Table2-1 Power adapter specifications Item Specifications Power input 100 V to 240 VAC Power output 54 VDC 0.74 A Figure2-14 Connecting the AP to a local power source by using a power adapter Verifying the connection After connecting the AP to a power source, examine the AP LED to verify the connection. - Page 16 C = Config, DC = DataCheck, R = Run, M = Master, B = Backup AP name AP ID State Model Serial ID 5620 WA5620 219801A0YHB147031200...
-
Page 17: Appendix A Technical Specifications
Appendix A Technical specifications The H3C WA5620 can operate as a fit AP. Figure3-1 Fit AP networking Meeting room Switch RADIUS server Switch Restaurant Network Switch management system Parking lot Switch Lobby Switch Table3-2 Technical specifications Item Specification Dimensions (W × D × H) 225 ×... -
Page 18: Appendix B Ports And Leds
Appendix B Ports and LEDs LEDs Table4-1 LED description Color Status Description No power is present. The AP is being initialized or an initialization Steady on exception has occurred. Flashing at 1 Hz No radio cards have been detected. Amber •... - Page 19 Figure4-1 Front view (1) Power port (2) 10/100/1000M Ethernet copper port (3) Console port (4) USB port (5) Reset button (6) Security slot Table4-2 Port descriptions Port Standards and protocols Description Used for receiving +48 VDC power from the local 48V DC power source.
Need help?
Do you have a question about the WA5620 and is the answer not in the manual?
Questions and answers