Sony STR-DA5500ES Operating Instructions Manual page 18

Multifunction remote
commander
(RM-AAL021/RM-AAL022)
The RM-AAL021 remote is supplied with the
European model only and RM-AAL022 is
supplied with the USA/Canadian model only.
The RM-AAL022 remote is used for
illustration purpose. Any differences in
operation are clearly indicated in the text, for
example, "USA/Canadian model only."
18
GB
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby)
video components that the
remote is assigned to operate
(page 172).
If you press ?/1 (2) button at
the same time, it will turn off
the receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (5).
B ?/1 (on/
Press to turn the receiver on or
standby) off.
If zone 2 or zone 3 is selected,
only the main receiver is turned
on or off with this button. To
turn off all components
including an amplifier in zone 2
or zone 3, press ?/1 and AV ?/
1 (1) at the same time
(SYSTEM STANDBY).
Saving the power in
standby mode.
When "Control for HDMI"
(page 142) and "Installer
Mode" (page 146) are set to
"OFF," and the power for
zone 2/zone 3 is turned off.
C ZONE
Press to switch the zone 2 or
zone 3 operation (page 105).
D AMP
Press to enable the receiver
operation.
E Input
Press one of the buttons to
buttons select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 62). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 172).
F TV INPUT
Press TV (wf), then press TV
INPUT to select the input signal
of a TV.