Cleaning The Hopper Of The Optimizer Tm - Labrie OPTIMIZER 2007 Operator's Manual

C
LEANING THE
For an efficient and safe performance of the different functions of the Optimizer
necessary to daily clean the hopper area.
To clean the hopper area of the Optimizer
M
AKE SURE THE
CLEANING AND MAINTENANCE
1. Turn on the engine and the hydraulic system.
2. Open the hopper roof gate.
Hopper roof
gate closed
3. Remove the tailgate safety pins.
4. Fully open the tailgate. A green light on the console turns on to prompt you about it.
5. Press and hold the green button on the console to move the packer all the way to
the end of its stroke.
Green
button
Part #: 90320
H
OPPER OF THE
WARNING
O TM
PTIMIZER IS IN AN AREA WITH TOTAL CLEARANCE TO PERFORM
.
Figure 27. Hopper roof gate
Tailgate
switch
Tailgate
open light
Figure 28. Control console and packer on Eject position
O
PTIMIZER
TM
:
Hopper roof
gate open
PACKER EXTENDED
(UNLOADING POSITION)
TM
TM
, it is
25