Approaching The Vehicle; Starting The Vehicle - Labrie OPTIMIZER 2007 Operator's Manual

O
PERATING THE
The different methods, procedures and necessary actions to operate the Optimizer
presented in this section of the Operator Manual.
A
LWAYS READ AND UNDERSTAND THE
EQUIPEMENT
A
PPROACHING THE
As you approach the vehicle, look for any foreign object around or under it. Check the
surroundings for people, other vehicles, and overhead obstructions. Ensure that the
TM
Optimizer is in an safe area where you will have all the clearance required to perform
the complete start-of-the-day inspection.
S
TARTING THE
Before starting the vehicle, the operator MUST perform a visual inspection of the truck.
Visual inspection
1. Look around the vehicle for accessible lights, safety labels, camera lenses, etc. and
clean them with a dry cloth.
2. Look for any structural damage.
3. Check for mechanical problems, rollers, hinges, door locks, wear items, etc.
Report any defective system to maintenance personnel.
4. Make sure that the tailgate safety pins are in place.
Part #: 90320
O
WARNING
.
V
EHICLE
V
EHICLE
TM
PTIMIZER
U ' G
SER S UIDE BEFORE OPERATING THE
TM
are
17