Troubleshooting - TESY DHF10CEL Usage And Storage Instructions

TROUBLESHOOTING

EN
If a condition listed below occurs, please check the following items before calling customer service.
Problem
The unit doesn't operate.
The dehumidifying function
doesn't work
No air is discharged
Operation is noisy
6
Usage and Storage Instructions
Possible Cause
Has the power cord been disconnected?
Is the tank full indication lamp blinking?
(The tank is full or in a wrong position.)
Is the temperature of the room above 35°
or below 5°?
Is the air filter clogged?
Is the intake duct or discharge duct
obstructed?
Is the air filter clogged?
Is the unit tilted or unsteady?
Is the air filter clogged?
Solution
Plug the power cord into the outlet.
Empty the water in the drainage tank and
then reposition the tank.
The protection device is activated and the unit
cannot be started.
Clean the air filter as instructed under
„Cleaning the dehumidifier".
Remove the obstruction from the
discharge duct or intake duct.
Remove the obstruction from the
discharge duct or intake duct.
Move the unit to a stable, sturdy location.
Clean the air filter as instructed under
„Cleaning the dehumidifier".
EN