Specifications; Troubleshooting - TESY DHF22CEL Usage And Storage Instructions

SPECIFICATIONS

EN
Power supply
Power input(EN60335)
Recommended Room Size
Net weight
Moisture removal ( 30° RH80%)
Cabinet dimemsion
Temp. range for use
Water tank capacity

TROUBLESHOOTING

If a condition listed below occurs, please check the following items before calling customer service.
Problem
The unit doesn't operate
The dehumidifying function
doesn't work
No air is discharged
Operation is noisy
6
Usage and Storage Instructions
220-240V~50Hz
410W
45m²
11.8кг
22
322Wx244D x548H
5°С~35°С
4.2 l
Possible Cause
Has the power cord been disconnected?
Is the tank full indication lamp blinking?
(The tank is full or in a wrong position.)
Is the temperature of the room above 35°
or below 5°?
Is the air filter clogged?
Is the intake duct or discharge duct
obstructed?
Is the air filter clogged?
Is the unit tilted or unsteady?
Is the air filter clogged?
(CE) N 842/2006:
R134a is a kind of fluorinated greenhouse gases covered
by the Kyoto Protocol. Its total global warming potential
(GWP) is 1300
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
Solution
Plug the power cord into the outlet.
Empty the water in the drainage tank and
then reposition the tank.
The protection device is activated and the unit
cannot be started.
Clean the air filter as instructed under
„Cleaning the dehumidifier".
Remove the obstruction from the
discharge duct or intake duct.
Clean the air filter as instructed under
„Cleaning the dehumidifier".
Move the unit to a stable, sturdy location.
Clean the air filter as instructed under
„Cleaning the dehumidifier".
EN