Maintenance - TESY DHF20CEL User And Storage Instructions

• Pull out the water tank
• Empty the water tank
• Replace the empty tank back into the unit
English
Do not discard the magnets and plastic rivets
in the tank. Otherwise, the dehumidifier cannot be
started, or the machine will not automatically stop
working when the water tank is full, and the condensed
water overflow will damage the floor of the room.
Please make sure to clean the condensed
water in the tank and put the tank in the original
position.
If the water tank is dirty, please rinse it with
clean water. Avoid using detergents, steel wire balls,
chemical dust removers, diesel, benzene, diluents or
other solvents. Otherwise, it can damage the tank and
cause leaks.
Put the water tank in its original position.
Otherwise, the indicator light will always be
red and the machine cannot start working again.
Continuous drainage:
1. Take out the PVC pipe, Straighten the drain pipe
2. Insert one end of the drain pipe into the drain outlet
at the top of the tank and connect the other end to the
bathroom, floor drain, outdoor or bucket like container,
defined drain area
Please do not block the drain or drain pipe, if
blocking phenomenon, condensed water will flow into
the tank.
Please do not bend the drain pipe. The height
of the drain pipe should be lower than the outlet.
The drain pipe must be firmly connected to the
outlet.

MAINTENANCE

Before cleaning and maintaining the machine, please
be sure to turn off the machine and unplug the power to
avoid electric shock.
Usage and Storage Instructions
EN
5