Figure 13. Remove the USB board mylar
Go to
https://support.lenovo.com/partslookup
part:
USB board mylar
Remove the USB board cable bracket 1
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the USB board mylar" on page 34
Step 1.
Remove one screw and then remove the USB board cable bracket 1.
Figure 14. Remove the USB board cable bracket 1
Screw specifications
M1.6 x L1.7
Go to
https://support.lenovo.com/partslookup
part:
USB board cable bracket
Remove the USB board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
to look up the Lenovo part number of the following replacement
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
35