Power management ........25 Putting the computer to sleep or shutting it down..25 Putting your computer to sleep ......25 Shutting down the computer ......25 Lenovo ideapad 130 ........26 Specifications ..........26 Status indicators ........... 28 Setting hotkey mode .........29 Fn key combinations/Hotkeys.......
• The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under...
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo ideapad 130-14IKB/ ideapad 130-15IKB/ideapad 130-15AST computer: • “General safety” on page 2 • “Electrical safety” on page 3 •...
Lenovo ideapad 130 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents.
Page 8
Lenovo ideapad 130 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
Lenovo ideapad 130 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
Page 12
Lenovo ideapad 130 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations.
Page 13
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Page 14
Lenovo ideapad 130 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
Page 15
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
Page 16
Lenovo ideapad 130 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
Page 17
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo ideapad 130 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S.
Page 19
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. •...
FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer.
Lenovo ideapad 130 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2.
3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo ideapad 130” on page 26. Note: Noise from the AC adapter does not always indicate a defect.
Lenovo ideapad 130 Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.
Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, just enter the recovery system.
Lenovo ideapad 130 Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on.
Related service information Power management Note: Power management modes are not supported for APM operating system. Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down.
Lenovo ideapad 130 Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Table 2. Status indicators Indicator Charge Symbol Indicator Meaning status status (solid The computer is powered on. white) Power Blinking The computer is in sleep mode.
Lenovo ideapad 130 Fn key combinations/Hotkeys You can access certain system settings quickly by pressing the appropriate hotkeys. Table 3. Hotkeys Enables/disables Airplane Mutes/unmutes the sound. mode. Enables/disables the Decreases the volume level. integrated camera. Increases the volume level. Locks the screen.
This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: •...
(ESD) strap (P/N 6405959) to remove potential shock reasons. Notes: • This manual applies to the following models: Lenovo ideapad 130-14IKB/ideapad 130-15IKB/ideapad 130-15AST. • The illustrations used in this manual are for Lenovo ideapad 130-15AST unless otherwise stated.
Lenovo ideapad 130 Hardware Maintenance Manual 1010 Optical drive Figure 1. Removal steps of optical drive Remove the screw 1, then gently pull the optical drive out in the direction shown by arrow 2. Step Screw (quantity) Color Torque M2.5 × 7 mm, Phillips head, nylok-coated (1) Black 1.85±0.15 kgf*cm...
Lenovo ideapad 130 1020 Base cover For access, remove these FRUs in order: • “1010 Optical drive” on page 32 Figure 2. Removal steps of base cover Remove the screws 1 from the bottom. Step Screw (quantity) Color Torque M2.5 × 7 mm, Phillips head, nylok-coated (12) Black 1.85±0.15 kgf*cm...
Page 38
Lenovo ideapad 130 Hardware Maintenance Manual Note: Applying labels to the base cover If you see the following labels on base cover, it needs to be peeled off from the old base cover, and put on the new base cover.
Figure 3. Removal steps of battery pack Unplug the battery pack connector in the direction shown by arrow 1, then remove the screws 2. Remove the battery pack in the direction shown by arrow 3. Lenovo ideapad 130-15IKB/Lenovo ideapad 130-15AST Lenovo ideapad 130-14IKB Step Screw (quantity)
Lenovo ideapad 130 Hardware Maintenance Manual 1040 Hard disk drive For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock.
Page 41
Lenovo ideapad 130 Figure 4. Removal steps of hard disk drive (continued) Remove the hard disk drive in the direction shown by arrow 4. Remove the hard disk drive board in the direction shown by arrow 5. Remove the screws 6, and then take out the metal frame.
Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to “Table 4. Parts list—Overall” on page 60 for Lenovo part numbers for the approved modules.
Page 44
Lenovo ideapad 130 Hardware Maintenance Manual Figure 6. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 4. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card.
Lenovo ideapad 130 1070 ODD board For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 Figure 7. Removal steps of ODD board Detach the ODD board connector in the directions shown by arrows 1 and 2.
Lenovo ideapad 130 Hardware Maintenance Manual 1080 Fan and heat sink assembly For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 Figure 8.
Page 47
Lenovo ideapad 130 Figure 8. Removal steps of fan and heat sink assembly (continued) Remove the screws 4. Lenovo ideapad 130-15IKB/Lenovo ideapad 130-15AST Lenovo ideapad 130-14IKB Step Screw (quantity) Color Torque M2 × 3.5 mm, Phillips head, nylok-coated (5) Silver 1.85±0.15 kgf*cm...
Page 48
Lenovo ideapad 130 Hardware Maintenance Manual Figure 8. Removal steps of fan and heat sink assembly (continued) Lift the fan in the direction shown by arrow 5. Attention: Do not handle the heat sink assembly roughly. Improper handling can cause distortion or deformation and imperfect contact with components.
Lenovo ideapad 130 1090 Speaker For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 Figure 9. Removal step of speaker Unplug the speaker connector in the direction shown by arrow 1. Remove the two speakers 2.
Lenovo ideapad 130 Hardware Maintenance Manual 1100 RTC battery For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 Figure 10. Removal steps of RTC battery Unplug the RTC battery connector in the direction shown by arrow 1.
Lenovo ideapad 130 1110 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
Page 52
Lenovo ideapad 130 Hardware Maintenance Manual Figure 11. Removal steps of system board (continued) Remove the system board in the direction shown by arrow 5. When installing: Make sure that the connectors are attached firmly.
Lenovo ideapad 130 1120 Upper case For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 • “1040 Hard disk drive” on page 36 •...
Lenovo ideapad 130 Hardware Maintenance Manual 1130 LCD unit For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 • “1040 Hard disk drive” on page 36 •...
Page 55
Lenovo ideapad 130 Figure 13. Removal steps of LCD unit (continued) Remove the screws 4. Step Screw (quantity) Color Torque M2 x 2.5 mm, Phillips head, nylok-coated (4) Black 1.85±0.15 kgf*cm LCD PANEL TO LCD COVER Lift the LCD panel slightly 5. Unplug the EDP connector 6. Then remove the LCD panel.
Lenovo ideapad 130 Hardware Maintenance Manual 1140 EDP cable and integrated camera For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 •...
Page 57
Lenovo ideapad 130 Figure 14. Removal steps of EDP cable and integrated camera (continued) Remove the camera board in the direction shown by arrow 4. When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement of it to make sure the connector is attached...
Lenovo ideapad 130 Hardware Maintenance Manual 1150 LCD hinges For access, remove these FRUs in order: • “1010 Optical drive” on page 32 • “1020 Base cover” on page 33 • “1030 Battery pack” on page 35 • “1040 Hard disk drive” on page 36 •...
Lenovo ideapad 130 Locations Front and right-side view 1 Integrated camera Note:The position of the camera indicator on select models may vary slightly. Please refer to the actual product. 2 Built-in microphone 3 Wireless LAN antennas 4 Computer display 5 Ventilation slots...
Lenovo ideapad 130 Hardware Maintenance Manual Bottom and left-side view 1 Speakers 2 Louvers 3 Power status indicator Note: For the description of each indicator, see “Status indicators” on page 28. d Memory card slot e Novo button f Combo audio jack...
Lenovo ideapad 130 Parts list This section presents the following service parts: • “Overall” on page 58 • “LCD FRUs” on page 64 • “Miscellaneous parts” on page 66 • “AC adapters” on page 67 • “Screws” on page 68...
Page 64
Lenovo ideapad 130 Hardware Maintenance Manual Table 4. Parts list—Overall ideapad ideapad ideapad FRU no. 130-14IKB 130-15IKB 130-15AST a-d See “Miscellaneous parts” on page 66. LCD unit (see “LCD FRUs” on page 64.) Upper Case ASM C 81H6 LA SPA 5CB0R34885 ●...
Page 65
Lenovo ideapad 130 Table 4. Parts list—Overall (continued) ideapad ideapad ideapad FRU no. 130-14IKB 130-15IKB 130-15AST Upper Case ASM C 81H7 ILD (ICE) 5CB0R34398 ● ● Upper Case ASM C 81H7 LA SPA 5CB0R34442 ● ● Upper Case ASM C 81H7 PORT 5CB0R34465 ●...
Page 66
Lenovo ideapad 130 Hardware Maintenance Manual Table 4. Parts list—Overall (continued) ideapad ideapad ideapad FRU no. 130-14IKB 130-15IKB 130-15AST MB C 81H7 WIN I37020U UMA 4G 5B20R34433 ● MB C 81H7 NOK I38130U UMA 4G 5B20R34467 ● MB C 81H7 WINI37020U UMA 4GNODD 5B20R57980 ●...
The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Lenovo ideapad 130 Hardware Maintenance Manual Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.