Sony DCR-TRV720 Operating Instructions Manual page 114

Making prints – Standard print
Making prints from other equipment
Before operation
Be sure to use a fully charged battery when using the battery to make prints.
(1) Insert the print cartridge. (p. 106)
(2) Set the POWER switch to VTR on your camcorder.
(3) Set DISPLAY to LCD in the menu settings. (p. 65)
(4) Press N on the VCR to start playback if you record a tape from VCR.
(5) Open the LCD panel and the printer cover, then make sure that the PRINT
(6) Perform steps 4 to 7 on page 112.
Using the A/V connecting cable
VCR
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect an S video cable (not supplied) to the S video jack of both your
camcorder and the TV or VCR.
114
Select TV program if you are recording from TV.
The picture from a TV or VCR appears on the LCD screen.
PAPER lamp is flashing slowly. Insert the print paper. (p. 109)
OUT
TV
S VIDEO
VIDEO
: Signal flow
S VIDEO
AUDIO/VIDEO