The Flow-Mode Measurement Display - Malvern Zetasizer Nano Series Accessories Manual

Chapter 4

The Flow-mode measurement display

The Flow-mode measurement displays are virtually identical to those shown when
performing a standard size measurement. The only difference being the inclusion
of different view options on the Result tab, i.e. Flow trace vs Volume as shown
below.
The standard tabs are explained in the Zetasizer Nano manual.
Result tab (1st tab)
The result tab will show the result obtained as the measurement progresses. The
result view will be updated after every run of the measurement.
The Result tab is named after the result view chosen, the result view shown above
is Flow trace vs Time. Different views can be selected by right-clicking on the
graph and selecting from the list displayed.
The views available are: Count Rate, Correlation Function, Flow trace vs
Volume and Flow trace vs Time and Monitor.

Note that the monitor only displays information before the measurement has
actually been started. When the measurement is started, the flow trace views should
be used.
Page 4-14
Monitor enables the count rate signals to viewed before a measurement is run.
Flow-mode option
MAN 0487