Exporting The Flow-Mode Data - Malvern Zetasizer Nano Series Accessories Manual

Chapter 4
The lead supplied by Malvern can be connected directly to the rear of the external
device, or to an output from the device, whichever is appropriate.
Consult the external device documentation to obtain the output connections for
connecting the Malvern lead.
Connector input voltage specification
The input voltage is -5v to +5v (analogue).

Exporting the flow-mode data

Once received, the external device data obtained during the flow-mode
measurement can be exported from the Zetasizer Nano software, saved as a text
file, and inserted into a spreadsheet software package (such as Microsoft Excel) for
analysis.
This is done using the Export flow result macro option in the Tools menu.
If this macro is not visible in the menu, select Tools-Options... to enable it.
Exporting the flow-mode data:




Page 4-4
Screen/Earth
External Input 1
External Input 2
External Input 3
(additional)
Select a flow measurement record. The export will not work if this is not done.
Select Tools-Macros-Export flow result.
A window is displayed requesting the export destination.
On selecting Save, the data will be exported and saved as a text (.txt) file. The
file can then be imported into the target program.
Flow-mode option
Lemo Connector
Connect to Nano
Rear Panel
ill 7907
MAN 0487