Table of Contents
Advertisement
PAN9028 Wi-Fi/Bluetooth Module
3. Use the command lsblk (1) to find out the device file name of the SD card.
4. Check the column SIZE (2) to find the SD card.
5. Remember the name from the column NAME (3).
6. Enter the following code into the command dd to write the SD card image to the desired
target drive: sudo dd if=ubuntu-wandboard_vX_Y.img of=/dev/sdb bs=1M
sudo is used because usually only the root user can write to device files like
/dev/sdb.
Quick Start Guide Rev. 1.0
6 Recreating SD Card Image
Page 30 of 34
Advertisement
Table of Contents
