PAN9028 Wi-Fi/Bluetooth Module
3. Press on the entry to connect to the PAN9028 (1).
Usually the PAN9028 will show up as OpenSynergy A2DP Application.
➔
The connection will be established and is shown as Connected (1). This takes
approximately a couple of seconds.
➔
Now any audio that is played back on the Android device, will be routed to the
PAN9028 instead and output on the audio jack of the PAN9028-IMX.
Depending on the connected headphones, the volume might need to be
adjusted to a different level.
For instructions on how to control the volume please refer to
5.3 Configuring Audio.
Quick Start Guide Rev. 1.0
4 Basic Usage
Page 19 of 34