Table of Contents
Advertisement
SAFETY INFORMATION
Operation
■ Before starting the machine, make certain that the feeding chamber is
empty.
■ Keep your face and body away from the feed intake opening.
■ Do not allow hands or any other part of the body or clothing inside the
feeding chamber, discharge chute, or near any moving part.
■ Keep proper balance and footing at all times. Do not overreach. Never
stand at a higher level than the base of the machine when feeding material
into it.
■ Always stand clear of the discharge zone when operating this machine.
■ When feeding material into the machine be extremely careful that pieces
of metal, rocks, bottles, cans or other foreign objects are not included.
■ If the shredding mechanism strikes any foreign objects or if the machine
should start making any unusual noise or vibration, immediately shut off
the power source and allow the machine to stop. Disconnect the machine
from the supply and take the following steps before restarting and
operating the machine:
- inspect for damage;
- replace or repair any damaged parts; (refer to trouble shooting section)
- check for and tighten any loose parts.
■ Do not allow processed material to build up in the discharge zone; this
may prevent proper discharge and can result in kickback of material
through the intake opening.
■ If the machine becomes clogged, shut-off the power source and
disconnect the machine from supply before cleaning debris.
■ Never operate the machine with defective guards or shields, or without
safety devices, for example debris collection bag in place.
■ Keep the power source clean of debris and other accumulations to prevent
damage to the power source or possible fire.
■ Do not transport this machine while the power source is running.
■ Stop the machine, and remove plug from the socket. Make sure that all
moving parts have come to a complete stop
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the machine.
■ Do not tilt the machine while the power source is running.
■ Switch-off the machine before attaching or removing the debris collection
bag.
7
of 21
Customer Helpline 01904 727508
V2:03/21
Advertisement
Table of Contents
