Table of Contents
Advertisement
OPERATION
Using The Vacuum Mode
Inspect the working area before starting. Remove any objects or debris that
could be thrown, jammed or become entangled.
Select the vacuum function using the selector lever on the side of the machine
and switch on.
With the Blower Vac resting on its wheels move the Blower Vac forwards
directing the nozzle at the debris to be collected. Alternatively with the Blower
& Vac held just above the ground swing the machine from side to side, moving
forwards and directing the nozzle at the debris to be collected. Do not force the
nozzle into the debris as this will block the suction tube and reduce the efficiency
of the machine.
Adjust the speed with the speed control dial if more power is required.
WARNING: Unplug the machine before attempting to clear any blockage and
follow instructions detailed on the following pages.
WARNING: Never use water for cleaning your product, use only a dry cloth. Do
not clean with chemicals or solvents, some can destroy plastic parts.
Vacuum mode(A)
Customer Helpline 01904 727508
16
of 21
V2:03/21
Advertisement
Table of Contents
